Articles

5 Weys Upgrade Your disk drive to SSD 

Pinterest LinkedIn Tumblr
81 / 100

SSD your disk drive starting to fail, or are you curious about trying the new SSD drives to ascertain what the large deal is? Follow the steps during this tutorial to vary your current disk drive to SSD.

What is SSD

At its foundation, an SSD consists of some memory chips on a circuit card. they need an In/Out interface,disk drive to SSD which transfers data and feeds the facility supply.

However, what makes an SSD more attractive to several users is that the lack of an actuator arm that moves across the disk, reading and writing the info. There are not any moving parts in the least. Combine this with a speed that’s nearly one-hundred times faster than an HDD, and it’s not a surprise that a lot of people are choosing to upgrade to an SSD.

A SATA SSD uses the SATA port while the NVMe SSD uses the M2 port, which isn’t available in older computers.

Check your interface

Before you upgrade to an SSD, use the System Information in Windows 10 to ascertain if your computer supports the SATA interface.

1. In Windows, press Win + R.

2. within the Run box, type msinfo32.

3. Press Enter or click OK.

4. When the System Information window opens, within the left window pane you’ll see an inventory of hardware categories. Expand Components, then Storage then chooses IDE. Search for the sort of drive within the list of specs.

5. you’ll also click on Disks and look for the model number online to work out the sort of storage you’ve got.

What you would like for a replacement SSD with a SATA connection:

An SSD that will slot in your machine. Most HDD is 2.5 inches, but you ought to check the dimensions of the HDD in your computer first. Don’t forget to verify the thickness.

A SATA to USB adapter.

There are two sorts of SSD — SATA and NVMe. A SATA SSD looks very almost like most hard drives since it’s enclosed during a case.

f you’ve got an NVMe connection, you need:

An NVMe SSD which will slot in your machine. While most M.2 drives are 22mm wide and 80mm long, some are shorter or longer. you’ll determine the dimensions by watching the four- or five-digit numbers in their names. for instance, the 22mm by 80mm drives will have the amount M.2 Type-2280.

An M.2 NVME USB Adapter.

For both connections, you would like an honest, high-quality small-head Phillips screwdriver to disassemble your computer.

How to upgrade to an SSD Drive

The first step is to require all the knowledge in your current disk drive and replica it over to your new drive. If you are doing this, your Windows OS will copy over also, eliminating the need to reinstall the Windows software.

Connect the new SSD drive to your computer using the SATA to USB (or M.2 to USB) adapter. We are getting to use the MiniTool Partition Wizard to clone your current disk drive. you’ll use Clonezilla, too, if you favor free and open-source software.

1. Download the MiniTool Partition Wizard, and install it on your computer.

2. Launch the program if the interface doesn’t automatically appear.

3. Choose “Disk Clone.”

4. Click Next then select the disk to clone.

5. Click the subsequent button again.

6. Select the target disk where you would like to clone your HDD and click on Next.

7. Choose Copy options. If your SSD is smaller than your old disk, select “Fit partitions to the entire disk.” Otherwise, it’s best to settle on “Copy partitions without resizing.”

8. Read the popup note and click on Finish.

9. Click Apply to finish the method.

Install a SATA SSD

If you’re not confident that you simply can take your computer apart and put it back together, it’s best to urge knowledgeable to try to to it. To be safe, a minimum of search the way to remove the HDD for your particular machine.

While taking the pc apart, don’t force the pieces apart. There could also be screws you can’t see holding it together, and you’ll find yourself doing damage to your machine.

Also, to assist with reassembly, take pictures to point out where the screws belong and keep the screws somewhere where you’ll organize them and not lose any or forget where they are going.

1. Lay the pc on a flat, non-carpeted surface.

2. Unplug the pc and press and hold the facility button for a couple of seconds. Taking these steps will ensure no leftover charge within the machine.

3. Locate the disk drive. If you can’t tell where it’s just by looking, check your device’s users’ manual to seek out it. Most laptops have the hard disc positioned under a removable panel, in order that is what we’ll assume. If your HDD is hidden under the keyboard or motherboard, there are extra steps.

4. Use your screwdriver to get rid of the screws securing the removable panel on your laptop.

5. Remove the duvet.

6. Remove the screws holding the HDD to your computer.

7. Loosen the other clips or cables securing the HDD.

8. Remove the drive.

9. If there’s a case or cover on the drive, remove it and remove the particular hard disc.

Installing NVMe SSD

1. Locate the M.2 PCIe slot. It’s very small, only about 2cm.

2. Install the motherboard standoff screw supported the length of your M.2 SSD drive.

3. With the standoff screw in situ, gently insert the drive into the M.2 slot. Push it in at a few 30-degree angles.

4. After installation, it’ll sit during a raised position. this is often normal.

5. Push the SSD down in order that it’s flush with the motherboard and sitting on the standoff mount screw.

6. Screw the SSD drive right down to the motherboard standoff mount. Tighten until it’s snug but don’t over-tighten.

Once you’ve got set the drive in situ, attempt to boot up the pc. Since you copied your OS alongside your other information, this step should be easy.

Good luck together with your new SSD! Your SSD will last longer than a typical HDD because it’s no moving parts, and it’ll be faster!

I'm a Full Stack Web Developer and SEO Specialist, entrepreneur & Freelancer. He started his online career back in 2015.

2 Comments

  1. Hi would you mind sharing which blog platform
    you’re working with? I’m going to start my own blog
    soon but I’m having a tough time making a decision between BlogEngine/Wordpress/B2evolution and
    Drupal. The reason I ask is because your layout seems different then most blogs and I’m looking for something unique.

    P.S My apologies for being off-topic but I had to ask!

Write A Comment